Manual. Description; Buy; Works with; Related models; More like this; Manufacturer. The Allen-Bradley ASB Remote I/O Adapter Module physically resides. The ASB/D remote I/O adapter module serves as an interface between . assembly and installation manual for your programmable controller or scanner. Remote I/O Adapter Module, ASB Series D, Product Data, Aug , ASB Series E, User Manual, Feb , UMA-US-P.

Author: Voodoogrel Bamuro
Country: Germany
Language: English (Spanish)
Genre: Life
Published (Last): 23 August 2012
Pages: 64
PDF File Size: 14.47 Mb
ePub File Size: 5.62 Mb
ISBN: 450-7-26458-935-1
Downloads: 79846
Price: Free* [*Free Regsitration Required]
Uploader: Zologrel

Ron brings up great points with using Auto-Configure to test the switch settings. Manual says switches 4 and 5 set addressing mode. The flashing you describe does typically mean you are not in Run mode.

But, if that IS the case, then at most your local chassis if it is a 1771-aasb unit would be using Rack 0 and Rack 1.

Chassis infact is as follows 5, 6 on all others off I recall a seeing somewhere a dip switch setting mmanual lets the remote auto restart without the need of a PB connected to the swing arm Please contact us to complete your request. Having the program might help us identify how the local chassis is addressed but it doesn’t do much more than 1771asb.

Oh, after more reading, I see there is a difference on backplane settings depending on what is in the chassis. We’ll send you an email letting you know exactly when your piece of equipment will be available for viewing Name: Valid Email Required Item to Inspect: I could use but it is not neccessary.

Tell us your switch settings. I have been using this method mannual needed with various equipment since the late 70s. Not just a picture from the manufacturer’s website, but the actual piece of equipment you would receive.


kaiju :: asb series b user manual

But we are risking things making that assumption. To this issue, Point to Point RS communication at baud is not at all slow with these processors for no more data than is being transfered.

It is unfortunate that words cannot be taken back in reality but I can and do ask for your forgiveness. See link, appendix’s show the differences between series.

Switch 2 did not seem matter but I set it as you suggested after setting only switch 6 to see if that was the culprit. I did not tell you the configuration If you are using 1-slot addressing for the remote chassis and it is configured for Rack 3 then Mike is pointing out that anything larger than an 8-slot chassis is useless.

Backplane Current Load at 5V. From that, we can tell if you have addressing overlap or other issues. Does not matter which adapter I try with either processor. That bit me, Thanks again Caspian. The error “blinking active light” indicates that there is a configuration mismatch.

Chances are your PLC-5 chassis is using Rack 0, but it could actually be using also be using 1, 2, and 3. Please feel free to contact us at sales artisantg.

ASB series B [Text] – – Interactive Q & A

He can use the serial port. No outputs turn on of course – So what am I missing. You can zoom in close to see the labels with the serial number or zoom out mankal see the overall condition of the equipment.

Page 70 of the publication: Unfortunately I am not going to be able to address this for another day or so but if you would kindly give me leave I will respond to you as soon as I have re-checked all of these.


That’s right, the one chassis could be using up to 4 racks.

Allen-Bradley 1771-ASB

Both adapters Active and Fault lights come on briefly when powering up then go off. S2 switches 2,3,4 should be off on the ASB and switch 1 should be on You still have not provided any of the key information: Also, let us know the size of the chassis’ local and remote you are using. Buying used equipment doesn’t always have to be a shot in the dark.

One of our friendly Customer Service representatives will be contacting you shortly with information on when the equipment you requested will be available for viewing. Can’t expext help if I give inacurate info. Very good points Mr.

How are the local chassis dip switches configured? We appreciate your interest in using our InstraView website! Actually, that is very simple, in that configuration I use the RSc port and in spite of the stated limitation of 50′ the limitation depends on several factors, I commonly use up feet at baud with no issues.

You mention 1-slot addressing for the remote chassis so we can assume that the local chassis is also 1-sot.

I have been watching and reading various posts on this board for several years and have appreciated your and everyone else’s unselfish contributions and time sacrifice to help others. Water under the bridge as they say. Click a thumbnail to view larger image: